Part number: DMXI
DMX interface
Max.load: 10 RGBox30 connected in parallel
Product weight: 0.1kg
Input: Connection from RGBox30 for power, DMX controller for DATA
Material: Plastic housing

Only use shielded twisted pair cables for the DMX signal wiring.
Earth the shielding of the cable.
Complete the DMX signal circuit by placing a 120 ohm resistor
in the free terminals of the final DMXI in the circuit.
Connect a maximum of 32 DMXI units to one DMXC.
Maximum cable run of between 20 and 50m depending on levels
of RFI and the quality of cabling.
Use an RS485 repeater where longer cables are needed.

Part number: DMXC
Programmable DMX controller

Zones: 6
Programs: 4
Material: Plastic housing
DMXC Input: 350mA (psu supplied)
Requirements: DMXI + RGBox30
Additional information: Control up to 2880 LED3 RGB with one DMXC
Use up to 32 DMXI (Interfaces) per DMXC

Wall mounted simple DMX controller.

Three simple rotating knobs provide the control, the first selects a colour, the second operates the brightness, the third is clearly labelled giving 12 colour changing programs, and even music activated light shows (sound to light) via it’s integral microphone. The DMX C WB controller can truly provide professional lighting control in a format that is simply child’s play.

Part number: DMX C WM01
simple Wall mounted DMX controller

Product weight: 1.22kg
Each controller will control one zone
Requires DMXI
Requires RGBox LED driver

1. Manual Solid colours select
2. Manual Pastal colours select
3. Auto colour change 5sec delay
4. Auto colour change 30sec delay
5. Auto colour change 60sec delay
6. Auto colour change 300sec delay
7. Auto colour change 600sec delay
8. Auto colour change 900sec delay
9. Auto colour change 1800sec delay
10. Auto colour change 3600sec delay
11. Auto sound to light with strobe effect
12. Auto sound to light with NO strobe effect

Control up to 1440 RGB sets from just one DMX C WMO1.

Suitable for use with the following products:
GL050 RGB
GL040 RGB
FibreLED RGB
LED Power RGB
LED3 RGB
LEDline 12/24 RGB

Pack contents comprise:
1 x DMX C WM01 controller
1 x 5m Cat5 Cable ( terminated with RJ45 connectors)
1 x 5m Cat5 Cable (1 end terminated with RJ45 connector)
1 x mains adapter

Dimensions: Length (front panel) 22.5mm
(full depth)47mm, width 145mm, height 85mm

Colour change is no longer a complicated procedure. RGBox makes it simple for large or small installations to achieve the desired effect.

Part number: RGBox 30
Simple RGB colour change controller

# Max.load: 27watt – 9watt max per circuit (3 circuits)
# Min. Load: 3watt – 1 x Red, 1 x Green, 1 x Blue
# Output: 3 x 0.35A (350mA)
# Input: 190-260v 0.15A
# Material: Plastic housing
# Weight: 0.40kg

# Can be used with most 350mA RGB LED’S
# CANNOT BE USED WITH 24VDC RGB FLEXIBLE STRIP
# NOTE: ONLY ONE CONTROLLER CAN BE USED PER CIRCUIT

Colour change can be operated from the comfort of your chair.

Part number: IR2 Control RGB Controller
Infrared RGB controller

# Use with: RGBox
# Input: 350mA RGB
# Material: Plastic housing

# Magic eyes Can be extended to a Max. distance of 7m (manufacturers recommendation)
# Max. 2 magic eyes can be used on one controller(not sold separatly)
# The cable between controller and RGBox CANNOT be extended..

# Must be used with IR2 remote control included in box.

A simple solution for DMX, our new RGBox50 24vDC 50watt has an integral DMX interface. Making it a perfect addition to you DMX colour change solution.

Part number: RGBox50
3 x 24v PWM Constant voltage RGB LED driver

# Input Voltage: 190-260v AC ~ 50..60Hz 0.26A
# Output: 24vDC – max 3 x 0.7A
# Material: Plastic housing

# Use with the: LED/ST/12×20 RGB
DMXC
DMXC WM01

NOTE: This 24VDC RGB Driver does not require DMXI (DMX interface)

Colour change can be operated from the comfort of your chair.

Part number: IR3 24V RGB Controller
Infrared RGB controller

# Max.load: 120watt
# Input: 24vDC
# Material: Plastic housing

# Magic eyes Can be extended to a Max. distance of 7m (manufacturers recommendation)
Max. 2 magic eyes can be used on one controller(not sold separatly)