Kellihers Electrical

T O’Reillys Electrical Supplies Ltd

Medlocks Electrical Distributors

PEWL Group

Enniscorthy Electrical Wholesale Ltd

EWL Electric

Joe Nolan Electrical Wholesale Ltd

South East Electrical Wholesale Ltd

Carlow Electrical Wholesale Ltd

H Q Electrical Wholesale Ltd

The landmark James Joyce Bridge, crossing the Liffey in Dublin’s city centre was the site of FibreLED’s latest high profile project.

The recently built feature bridge was previously illuminated with over 100 x 5ft standard fluorescent tubes consuming a massive 7500watts.

Access for maintenance was a major problem and required road closures. The fluorescent tubes were frequently blowing, creating constant maintenance issues which proved very costly and therefore unsustainable. Both from a safety perspective and visually as a feature the lighting to the bridge in its existing format was simply not working. Additionally the massive consumption of the existing system needed to be reduced as a matter of urgency.

FibreLED in association with Read Electrical Contractors and Dublin Corporation presented our FLTube1500 LED. This is a clear LED tube replacement fitting that offers a replacement to a traditional fluorescent tube with a 70% reduction in consumption, similar light levels and up to 50,000 hour maintenance free lighting.

The installation of LED tubes reduced the consumption from over 7500watts to approximately 2000watts and will eliminate previous maintenance and access issues.

Each luminaire comes complete with integral LED PSU and thermal management system to ensure maximum output and durability. Fittings offer high lumen output with little wastage and no maintenance.

The key with using LED is to reduce. Reduce running costs, Reduce maintenance costs, Reduce heat output and Reduce your carbon footprint
Our range offers LED solutions across the lighting spectrum
• GU10/MR16 Downlight replacements for halogens (Fully Dimmable)
• LED T8 Tubes to replace Flourecent
• LED HIGHBAYS to replace Metal Halide.
• High Output LED Floods to replace Metal Halide
• LED Candle Lamps E14 and E27 Fittings (Fully Dimmable)
• Strip Lighting systems

Just one of many high profile LED retro-fits include the office installation at the HSE HQ Building in Swords Co. Dublin. HSE were aware that they needed be more efficient with their energy usage.
As a major part of this energy drive lighting was targeted as an area whereby significant savings could be made in both consumption and maintenance costs. The HSE HQ in Swords Dublin is a hectic commercial location with a mix of open plan office areas, smaller offices, and conference and meeting rooms. A suitable LED retro fit specification would offer significant cost savings and virtually eliminate maintenance costs. However, major concerns existed for the HSE.
• Could the light level particularly over a working desk be achieved?
• Could the light level in between fittings be achieved?
• Was the colour of the light suitable for a working environment?
• Could the change be made without a significant noticeable drop in light level, colour, shadowing etc. so as not to encourage complaints from staff.
The FibreLED Range of LED provides a replacement to almost any conventional lamp with a massive reduction on consumption costs, with no compromise on light level or colour temperature. FACT.

As a major part of this energy drive lighting was targeted as an area whereby significant savings could be made in both consumption and maintenance costs. The HSE HQ in Swords Dublin is a hectic commercial location with a mix of open plan office areas, smaller offices, and conference and meeting rooms. A suitable LED retro fit specification would offer significant cost savings and virtually eliminate maintenance costs.  However, major concerns existed for the HSE.

Could the light level particularly over a working desk be achieved?

Could the light level in between fittings be achieved?

Was the colour of the light suitable for a working environment?

Could the change be made without a significant noticeable drop in light level, colour, shadowing etc.  so as not to encourage complaints from staff.

The FibreLED Range of LED provides a replacement to almost any conventional lamp with a massive reduction on consumption costs, with no compromise on light level or colour temperature. FACT.

FibreLED in association with H.Shiels electrical contractors provided the following;

Tube replacement – FLTube600-c – 9-Watt LED Fluorescent tube replacement. This was installed into 600 x 600 ceiling modular fittings throughout the office areas reducing the consumption per fittings from 85watts approx to 36watts.

Downlights – FL1069A - 15Watt Recessed LED downlight replaced the recessed PL and metal halide downlights. This replacement reduced the consumption per fitting from 72/80watts to 15watts – a massive savings.

Downlights – FLDLLED5 – 5Watt Recessed LED downlights replaced existing 50watt halogen dichroic downlights. Reducing the consumption from 50watts to 5watts per fitting – This represents 90% reduction in consumption savings.

This was a significant LED replacement project. LED Lighting was used as the only task lighting within a commercial office environment. It was a massive success and the HSE felt confident and assured in the quality of product, the warranties in place and indeed the track record and expertise of FibreLED in commercial LED projects.

The lighting being switched on for long periods throughout the centre meant management had to look for more efficient alternative to their lighting system.

A system that would provide the existing light levels,  easy installation and a minimum maintenance programme was required. The Swan Centre replaced the 70watt metal halide with the 15watt LED downlighter lux  which not only reduced usage from 4500kw to 975 watts but also provided a higher light level than the existing lighting.

Due to the fact that lights were on for long periods resulting in very high running cost management had to investigate alternative lighting options. A FL tube LEd was installed into vapour proof fittings. These tubes have been rigorously tested and built to the highest standard for long life maintenance free applications. This offered a durable and extremely efficient alternative to traditional fluorescent lighting with countless environmental advantage and substantial consumption savings. It met with brightness level requirements and produced a reduction from 130watts per fitting to 40 watts.

Buck Whaleys recent refurb required a slick, atmospheric lighting detail. The landmark nightclub required both feature lighting and functional traditional lighting to facilitate a multifunctional venue. The brief was to create an atmoshere of both a weekend venue and a corporate functions venue. This meant the lighting system had to be versatile to give the functional effect but also give the atmospheric nightclub effect. FibreLED were commissioned to assist in the creation of this. Colour Changing systems were installed to bar and nightclub areas as well as traditional, functional and dimmable luminares . Coupled with the luxury interior the overall finish is a cool and stylish nighclub.

The specification required an LED strip system that would be flexible enough to easily fit into light boxes of many various sizes, a system that would be bight enough to offer similar light levels to that of the fluorescent and a system that was suitably durable and had to correct warranties to be used in such a large-scale LED switching project.

After a painstaking testing and sampling period the fibreLED FLpod LED LUX system was chosen. It offers sufficient light level is flexible, durable, uses high quality diodes and will consume around 85% less power that the a fluorescent system. Considering all the signage being on for long periods the system will offer huge savings within the Airport and will pay for itself in terms of savings within around 12months.

A real alternative to fluorescent lighting are LED tubes. They contain absolutely no mercury, do not emit UV radiation and are truly energy saving, lasting four times as long as fluorescent bulbs.

LED Flood lights offer up 80% consumption savings on traditional luminaires. Easily installed and retrofitted. Each Luminaire comes complete with integral LED PSU and thermal management system to ensure maximum output and durability. Fittings offer high Lumen output with little light wastage and no maintenance.

F L 2 0 1 9 ( F L 1 0 0 ) L E D F L O O D L I G H T

F e a t u r e s

W a t t a g e 100W
L u m e n O u t p u t  7500lms
B e a m a n g l e 170dg
C o l o u r R a I n d e x 80ra
H o u s i n g Aluminium, Glass cover
C o l o u r T e m p 3000-4000k warm 5000-6000 cold
I P R a t i n g IP65
E n e r g y S a v i n g 80% consumption saving
W a r r a n t y 2yrs

Traditionally fibre optic lights have big drawbacks. Expensive to buy and run, noisy fan units, and cumbersome, heavy drivers unsuitable for mounting above many ceilings. That’s why Collingwood’s new fibre optic system is so popular. Using 1watt of LED power to light up 30 strands really saves money: plus the lifespan of the LED is years not months as is normal with many fibre optic lamps. The fibre LED light unit runs silently and weighs less than a golf ball, making it suitable for mounting on even the most sensitive ceiling tiles with no fuss. This flexibility in positioning the fibre LED light means you can run far shorter lengths of fibre optic cable. Again this saves much expense. Get an awesome fibre optic installation, at a fraction of the cost with this new, easily installed, maintenance free system.

Part number: LED light injector
Fibre LED light injector unit for use with fibre optic 1/30

LED Input: 350mA
LED Output: 1watt
Material: Aluminium
Wiring: Series
Cable: 1.2m 4core cable

This cool to the touch stainless steel spike light is IP54 rated making it suitable for outdoor applications. Made to a high specification the SL020/LED3 features the latest in LED technology. Three 1w power LEDS give an awesome effect. It’s built to last too, you can expect 10 years plus of maintenance free LED light output.

Part number: SL020/LED3 Floodlight/Spotlight
Stainless steel 3watt LED spike light

# IP Rating: IP54
# LED Input: 350mA
# LED Output: 3watt
# Material: Stainless steel 316
# LED Beam angle: Floodlight 45° : Spotlight 12°
# Wiring: Series
# Cable: 3m H05RN-F

With colour changing lighting in such demand. Collingwood lead the way as always, bringing you colour changing fittings in more variety than anyone else. These new classy high performance spike lights are ideal for creating the right mood on there own, or as part of a larger scheme.

Part number: SL020 Black /LED 3 RGB
Colour changing RGB Spike light

# IP Rating: IP54
# LED Beam angle: 45°
# LED Output: 3watt
# Input: 350mA RGBox 30
# Material: Stainless steel 316
# Wiring: Series
# Cable: 3m 4core cable

Elegance and performance. GL050 RGB is designed to deliver both. Three power LED’s provide a strong light, while the special lens creates a classy lighting effect that is easy on the eye. Position along paths, in lobbies or flowerbeds for the professional look.

Part number: GL050 RGB
RGB LED ground light

# IP Rating; IP68 @ 1BAR
# LED Output: 6.7watt @ 350mA
# Input: 350mA RGB driver (RGBox 30) – 4 x GL050 RGB per driver
# Material: Stainless steel 316
# Wiring: Series
# Glass: Toughened walk over frosted glass
# Cable: 2 x 3m 4-core 0.75mm
# Cut out size: 65mm
# Temperature: 44&degC

Traditionally fibre optic lights have big drawbacks. Expensive to buy and run, noisy fan units, and cumbersome, heavy drivers unsuitable for mounting above many ceilings. That’s why Collingwood’s fibre optic system is so popular. Using just LED power to light up 30 strands really saves money; plus the life span of the LED is years not months as is normal with many fibre optic lamps. This flexibility in positioning the fibre LED light means you can run far shorter lengths of fibre optic cable. Again this saves much expense. Get an awesome fibre optic installation, at a fraction of the cost with this new, easily installed, maintenance free system.

Part number: Fibre LED light RGB
Fibre LED light RGB for use with fibre 1/30 (fibre optics)

# LED Output: 6.7watt per unit
# Input: 350mA
# Material: Aluminium housing
# LED Driver: RGBox 30 (4 Fibre LED light per RGBox 30)
# Wiring: Series
# Additional requirements: Fibre 1/30 (fibre optics)
# Use LED3 RGB Ext

LED/IP/ST 6×12 Fixings

Part number: Line profile Material: Aluminium Minimum length – 1m Maximum length – 3m Use U-profile to secure LED/IP/ST into Line profile Clear or frosted cover available 3 fixing clips per metre recommended Part Number: End cap Material: Power coated Aluminium 1 end cap per end Fixings included Part Number: Acrylic cover Material: Acrylic Minimum length – 1M Maximum length – 3m Part Number: Fixing clip Sold in single units 3 fixing clips per metre recommended

Stair edging, bar edging, floor marking and wall enhancing. LED IP strip can do it all. Hard wearing and suitable for indoor and outdoor applications, this flexible light strip really is the solution.

Part number: LED/IP/ST 6×12
Flexible IP66 rated LED strip

# LED Input: 24vdc
# Material: PVC
# Wiring: Parallel
# Power Supplies: PDC 100/24, PDC 200/24, PDC 25/24

Part number: DMXI
DMX interface
Max.load: 10 RGBox30 connected in parallel
Product weight: 0.1kg
Input: Connection from RGBox30 for power, DMX controller for DATA
Material: Plastic housing

Only use shielded twisted pair cables for the DMX signal wiring.
Earth the shielding of the cable.
Complete the DMX signal circuit by placing a 120 ohm resistor
in the free terminals of the final DMXI in the circuit.
Connect a maximum of 32 DMXI units to one DMXC.
Maximum cable run of between 20 and 50m depending on levels
of RFI and the quality of cabling.
Use an RS485 repeater where longer cables are needed.

Part number: DMXC
Programmable DMX controller

Zones: 6
Programs: 4
Material: Plastic housing
DMXC Input: 350mA (psu supplied)
Requirements: DMXI + RGBox30
Additional information: Control up to 2880 LED3 RGB with one DMXC
Use up to 32 DMXI (Interfaces) per DMXC

Wall mounted simple DMX controller.

Three simple rotating knobs provide the control, the first selects a colour, the second operates the brightness, the third is clearly labelled giving 12 colour changing programs, and even music activated light shows (sound to light) via it’s integral microphone. The DMX C WB controller can truly provide professional lighting control in a format that is simply child’s play.

Part number: DMX C WM01
simple Wall mounted DMX controller

Product weight: 1.22kg
Each controller will control one zone
Requires DMXI
Requires RGBox LED driver

1. Manual Solid colours select
2. Manual Pastal colours select
3. Auto colour change 5sec delay
4. Auto colour change 30sec delay
5. Auto colour change 60sec delay
6. Auto colour change 300sec delay
7. Auto colour change 600sec delay
8. Auto colour change 900sec delay
9. Auto colour change 1800sec delay
10. Auto colour change 3600sec delay
11. Auto sound to light with strobe effect
12. Auto sound to light with NO strobe effect

Control up to 1440 RGB sets from just one DMX C WMO1.

Suitable for use with the following products:
GL050 RGB
GL040 RGB
FibreLED RGB
LED Power RGB
LED3 RGB
LEDline 12/24 RGB

Pack contents comprise:
1 x DMX C WM01 controller
1 x 5m Cat5 Cable ( terminated with RJ45 connectors)
1 x 5m Cat5 Cable (1 end terminated with RJ45 connector)
1 x mains adapter

Dimensions: Length (front panel) 22.5mm
(full depth)47mm, width 145mm, height 85mm

Colour change is no longer a complicated procedure. RGBox makes it simple for large or small installations to achieve the desired effect.

Part number: RGBox 30
Simple RGB colour change controller

# Max.load: 27watt – 9watt max per circuit (3 circuits)
# Min. Load: 3watt – 1 x Red, 1 x Green, 1 x Blue
# Output: 3 x 0.35A (350mA)
# Input: 190-260v 0.15A
# Material: Plastic housing
# Weight: 0.40kg

# Can be used with most 350mA RGB LED’S
# CANNOT BE USED WITH 24VDC RGB FLEXIBLE STRIP
# NOTE: ONLY ONE CONTROLLER CAN BE USED PER CIRCUIT

Colour change can be operated from the comfort of your chair.

Part number: IR2 Control RGB Controller
Infrared RGB controller

# Use with: RGBox
# Input: 350mA RGB
# Material: Plastic housing

# Magic eyes Can be extended to a Max. distance of 7m (manufacturers recommendation)
# Max. 2 magic eyes can be used on one controller(not sold separatly)
# The cable between controller and RGBox CANNOT be extended..

# Must be used with IR2 remote control included in box.

A simple solution for DMX, our new RGBox50 24vDC 50watt has an integral DMX interface. Making it a perfect addition to you DMX colour change solution.

Part number: RGBox50
3 x 24v PWM Constant voltage RGB LED driver

# Input Voltage: 190-260v AC ~ 50..60Hz 0.26A
# Output: 24vDC – max 3 x 0.7A
# Material: Plastic housing

# Use with the: LED/ST/12×20 RGB
DMXC
DMXC WM01

NOTE: This 24VDC RGB Driver does not require DMXI (DMX interface)

Colour change can be operated from the comfort of your chair.

Part number: IR3 24V RGB Controller
Infrared RGB controller

# Max.load: 120watt
# Input: 24vDC
# Material: Plastic housing

# Magic eyes Can be extended to a Max. distance of 7m (manufacturers recommendation)
Max. 2 magic eyes can be used on one controller(not sold separatly)

Part Number: Bol LED bracket

A simple and robust ground fitting for use when installing the Bol LED 1 on hard surfaces.

The Collingwood bollard range. offers big impact at small price. This robust product is finished within classy anodise, and topped with a ‘halo’ effect LED light. Puts the finishing touch to pathways, car parks and steps.

Part number: BOL LED 020 T1
1watt 350mA LED Aluminium bollard

# IP Rating: IP65
# LED output: 1watt @ 350mA
# LED Input: 350mA
# Material: Aluminium
# Product weight: 1.66kg

Now with the option of 3 wide angle high power Luxeon Rebel LED’s and the convenience of running of a 24 volt input, the classic wooden bollard with a modern twist. BOL LED 030 24V features quality Iroko wood that requires neither treatment nor varnish. and due to the cleverly designed cut angles, looks fantastic when approaching from any direction. A tasteful addition to paths and driveways and car parks.

Part number:BOL LED 030 24V
24V LED Bollard

Technical Data:
# IP Rating: IP65
# Marerial: Wood
# Input: 24V DC
# Output: 4watt
# Beam angle: approx. 110°
# Lux @ 1m: 90
# Wiring: Parallel
# Cable supplied: 1.8m H05RN-F
# Colours available: Warm White, Cool White & Blue
# BOL LED Accessories: BOL LED Bracket
# Also available in OAK or other woods on request only, Please call sales for more information.

Straight to mains internal up and downlights, easy to install, comes with it’s own standard size pattress box.

Part number:MC015 S
Mini cube LED spot light

Technical Data:

# IP Rating: IP20
# Input voltage: 230-240v ac
# Output: 1 watt
# Material: Aluminium
# Beam Angle: 10°
# Available colours: Nat White, Blue

Brand new for 2006, the mini cube features a spot lens creating an awesome light effect on the wall above it. A “must have” for modern establishments wishing to create the right image. IP67 rated, easy to install, low running costs, and bullet-proof reliability are just some of the features of this stylish light.

Part number: MC010
1watt 350mA LED Mini cube single

# IP Rating: IP65
# LED output: 1watt @ 350mA
# LED Input: 350mA
# LED Beam angle: 10°
# Material: Aluminium
# Colour available: Cool White, Warm white, Blue, Red, Amber & Green
# Cable: 135mm Red & Black 0.35mm Teflon cable
# Wiring: Series
# Fixing kit: 25mm Bespoke wall plug

Part number: LEDline 400/800 RGB 110° / LEDline 400/800 RGB 45° / LEDline 400/800 RGB 25X6
Three Powerful RGB LED wall washers

# IP Rating: IP65
# Input: 350mA RGBox30 (1 LEDline per RGBox )
# LED Output: 12w LEDline 400 : 24w LEDline 800
# Material: Aluminium
# Cable: 3m 4Core 0.75
# Beam angle 110° / 45° / 25 x 6° asymmetric
# Glass temp: 41&degC
# Product weight: 1.6kg

Carrickdale Hotel – Spa Lighting installation. The brief was to create an ambient atmosphere throughout the Spa/Sauna area. This was achieved by installing an FLpod LED RGB colourchanging strip system behind the glass mood wall and into the ceiling coves. The result is an environment that encomapasses the idea of relaxation and well being. The mood can be controlled at the touch of a button and the atmosphere can be changed from a warming amber to a cool relaxing blue.  The lighting in the spa/sauna area is very unique and adds greatly to the experience of the Spa.

A classic wooden bollard with a modern twist. BOL LED 1 features quality Iroko wood that requires neither treatment or varnish. It contains a high power Luxeon LED, and due to the cleverly designed cut angles, looks fantastic when approaching from any direction. A tastful addition to paths and driveways.

Part number:  BOL LED 1
Quality Wooden bollard incorporating a 1watt 350mA LED

# IP Rating: IP65
# LED output: 1watt @ 350mA
# LED Input: 350mA
# LED Beam angle: 45°
# Material: Solid hardwood post, FSC approved timber
# Colour available: Cool White, Blue & Green
# Available to order in oak and other woods
# Cable: 1.8m H05RN-F Rubber cable
# Wiring: Series

Part number: LED3 9watt Flood RGB
LED3 RGB MR16 Fitting

# LED beam angle: 45°
# Fitting: MR16 (50mm)
# Output: 9watt
# Material: Aluminium
# Wiring: Series
# Cable: 1.1m 4 x 0.75 core Cable
# LED Input: 350mA RGBox30 2 Units per RGBox Use LED3 RGB Ext

Being slick and modern in design, along with the use of only the highest quality materials, ensures Collingwood’s LEDLINE is the choice of the lighting connoisseur. High power Luxeon LEDs provide the power, and are easy to control with Collingwood’s DMX Controllers.

Part number:  LEDLINE 400 110° / LEDLINE 400 45° / LEDLINE 400 25X6
Three Powerful 700mA LED wall washers in white

# IP Rating: IP65
# Input: 700mA or(can run at 350mA with 50% reduction in light output)
# LED Output: 18Watt @ 700mA , 9Watt @ 350mA
# Material: Aluminium
# Wiring: one unit per PLU/700 3-9 (700mA) or One unit per PLU/350 1-9 (350mA)
# Cable: 3m 2 Core 0.75
# Beam angle 110° / 45° / 25 x 6° asymmetric
# Glass temp: 41&degC
# Product weight: 1.6kg

Part number: WL075
Part number: WL175 Black anodised aluminum
3 x 3w LED Down light

Technical Data:
# Input: 230-240v ac Mains
# IP Rating: IP65
# Material: Aluminum, also available Black anodised aluminum
# Output: 9watt max.
# Beam angle: approximately 45°
# Available in: Natural white
# Warranty: Covered by Collingwood 7yr warranty (conditions apply)

Installation Data:
# Parallel wiring, any external connections must be water tight.
# Comes complete with fixing kit and installation instructions.
# (a copy of installation instructions can be found at the bottom of this page).
# Integral 700mA driver (NOT REPLACABLE)

This classic LED mini light remains hugely popular, it has been installed everywhere from childrens bedroom ceilings to West End stages, from fashionable restaurants to old fashioned narrow boats. There really is no end to the applications suitable for this high powered mini LED. Featuring an incredibly simple plug and play system, even the largest of applications can be wired in minutes.

Part number:  LED Lyte
Mini 1 watt LED spotlight

# IP Rating: IP20
# LED output: 1watt @ 350mA
# LED Input: 350mA
# LED Beam angle: 110°
# Material: Plastic housing
# Wiring: Series
# Cut-out: 25mm
# Available colours: Cool White, Warm White, Blue, Red, Green, Amber

Style, function and elegance. This new LED pendant combines all three. The latest LED technology means this range can be used as part of a scheme, as task lighting and/or decorative lighting. Made to the highest specification, using top grade materials, this range is a must for contemporary rooms and corridors. Also with an integral power supply, making this even easier to install.

Part number:  DLP 1 WH
3watt LED pendant downlight built in LED driver

# IP Rating: IP20
# LED Output: 3watt @ 700mA
# Intregral LED driver: 700mA
# LED Driver input: 100 – 240v
# Material: Aluminium

Part number:DL090
A complete LED downlight kit

Technical Data:
# LED lamp: LL090 700mA flood
# Downlight housing: LV119
# LED Driver: 700mA
# Product weight: 0.350kg
# Single carton dims: 17×12x9.5cms

The real deal! Finally a complete LED downlight unit that is ready to connect directly to mains, produces more lumens per watt than a 50w lamp, and meets all building regulations. This great looking, top performing downlight uses a patented design to ensure exceptionally long life which is unachievable via the usual “can” design Fire protection method. That’s why we offer a 7 year extended warranty on every FR 01011 F NW .
Note: This product is not dimmable

Part number: FR 03011 F NW
Fixed White fire rated LED downlight with Flood Lens

Technical Data:
# Input: 230-240v AC mains
# Output: 356.64 Lumens
# IP Rating: IP44
# Colours available: Natural white
# Material: White Aluminium
# Fire rating: 90mins
# Tested to: BS EN 1365-2

Complies with Building regs:
# Part B –Fire Safety,
# Part C – Contaminates and moisture protection,
# Part L – Energy conservation
# Part P – Electrical Safety.
# Part E – Resistance to the passage of sound.

The real deal! Finally a complete IP65 LED downlight unit that is ready to connect directly to mains, produces more lumens per watt than a 50w lamp, and meets all building regulations. This great looking, top performing downlight uses a patented design to ensure exceptionally long life which is unachievable via the usual “can” design Fire protection method. That’s why we offer a 7 year extended warranty on every FR 01011 F NW .
Note: This product is not dimmable

Part number: FR 01031 F NW
IP65 Fixed Silver Aluminium fire rated LED downlight with Flood Lens

Technical Data:
# Input: 230-240v AC mains
# Output: 356.64 Lumens
# IP Rating: IP65
# Colours available: Natural white
# Material: Aluminium
# Fire rating: 90mins
# Tested to: BS EN 1365-2

Complies with Building regs:
# Part B –Fire Safety,
# Part C – Contaminates and moisture protection,
# Part L – Energy conservation
# Part P – Electrical Safety.
# Part E – Resistance to the passage of sound.

The real deal! Finally a complete LED downlight unit that is ready to connect directly to mains, produces more lumens per watt than a 50w lamp, and meets all relevant building regulations. This great looking, top performing downlight uses a patented design to ensure exceptionally long life which is unachievable via the usual “can” design Fire protection method. That’s why we offer a 7 year extended warranty on every FR 01021 F NW .
Note: This product is not dimmable

Part number:FR 01021 F NW
Tilt Silver Aluminium fire rated LED downlight In Neutral White with Flood Lens

Technical Data:
# Input: 230-240v AC mains
# Output: 356.64 Lumens
# IP Rating: IP44
# Material: Aluminium
# Fire rating: 90mins
# Tested to: BS EN 1365-2

Complies with Building regs:
# Part B – Fire Safety
# Part C – Contaminants and Moisture Protection
# Part L – Energy Conservation
# Part P – electrical Safety
# Part E – Resistance to the passage of sound

The real deal! Finally a complete LED downlight unit that is ready to connect directly to mains, produces more lumens per watt than a 50w lamp, and meets all building regulations. This great looking, top performing downlight uses a patented design to ensure exceptionally long life which is unachievable via the usual “can” design Fire protection method. That’s why we offer a 7 year extended warranty on every FR 01011 F NW .
Note: This product is not dimmable

Part number: FR 01011 F NW
Fixed Silver Aluminium fire rated LED downlight with Flood Lens

Technical Data:
# Input: 230-240v AC mains
# Output: 356.64 Lumens
# IP Rating: IP44
# Colours available: Natural white, and Warm White
# Material: Aluminium
# Fire rating: 90mins
# Tested to: BS EN 1365-2

Complies with Building regs:
# Part B –Fire Safety,
# Part C – Contaminates and moisture protection,
# Part L – Energy conservation
# Part P – Electrical Safety.
# Part E – Resistance to the passage of sound

Three power LEDs combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with its robust stainless steel construction, the GL041/51 will remain looking great for many years to come. A low profile design and simple wing springs ensure installation is quick and easy.

Part number:  GL051
3watt LED ground light with frosted glass

# Input: 350mA driver
# IP Rating: IP68 @ 2m
# LED Output: 3watt
# LED Beam angle: N/A
# Material : Stainless steel 316
# Cable: 3m 2core cable
# Glass Temp: 55&degC
# Wiring: Series
# Hole size: 65mm

Discreet yet powerful, this Luxeon LED powered ground light is perfect for dance floors, decking areas, entrance halls and pathways. Indoors or out, the IP68 marine grade stainless steel unit will give a flawless performance for many years of maintenance free operation. Available with a flood or a spot beam angle, means the GL019 is suitable for any application. With cool glass for added safety.

Part number:  GL019 Flood & Spot
Low profile groundlights with 1w Luxeon LEDs

# IP Rating: IP68 @ 1bar (9m of water)
# Beam angle: Flood 45°, Spot 12°
# Material: Marine grade(316)stainless steel
# Glass: 5mm toughened walkover glass
# LED input: 350mA
# LED Output: 1watt @ 350mA
# Cable: 1m 0.35mm red and black teflon cable
# Wiring: Series
# Cutout: 31-35mm

Real power without the hassle of ongoing maintenance. At last, a high quality in-ground fitting that requires zero lamp changing. The powerful 9w Luxeon LED technology inside means it’s perfect for a large scale effects. Also the adjustability of the light angle means it’s great for lighting trees, buildings, statues and driveways. And with a built in power supply, means straight to mains simplicity too.

Part number:  GL007/LED3 9w Spot / flood
Buried uplighter with LED and LED Driver

# IP Rating: IP67
# Integral Power supply : 700mA
# LED beam angle: Flood = 45° ; Spot = 12°
# Flying Lead: 1m 3 x 0.75mm
# Maximum static load: 2000kg
# Maximum drive over speed: 15mph
# Material: Stainless steel cover ring
# Glass: Drive over 10mm tempered glass
# Body Material: Painted and pre-treated aluminium die cast base
# Sleeve: Nylon installation sleeve
# Cable diameter: cable size 6-12mm
# Fully sealed PG13.5 cable gland
# Earthed body

Part number:  GL090 RGB
9watt RGB LED ground light

# IP Rating: IP68 @ 2m
# Input: 350mA RGB driver
# LED Output: 9watt MAX.
# LED Beam angle: 45°
# Material : Stainless steel 316
# Cable: 2 x 3m 4core cable
# Glass Temp: 32&degC
# Wiring: Series
# Hole size: 65mm
# Product weight: 0.82kg
# Single carton dims: 11×11x10.5cms

With it’s chamfered edge, threaded body and threaded sleeve, the GL019 STK is designed for mounting in panels, spa baths, pools, pathways, water features and ponds. Available with blue or white LEDs ONLY.

Part number:  GL019 S TK
Low profile groundlight with 1w Luxeon LEDs Ideal for Spa baths

Technical spec.
# IP Rating: IP68 @ 1bar (9m of water)
# LED input: 350mA
# LED output: 1watt @ 350mA
# Beam angle: 12° Spot lens
# Material: Marine grade(316)stainless steel
# Cable: 1m 0.35mm red and black teflon cable flying leads
# Wiring: Series
# Cut out: 35mm inc tube
# Colours available: Cool white & Blue

Sleek and stylish, the GL018 T features marine grade stainless steel, and is submersible in water down to 2 metres. The thread and nut makes this product simple to install into panels, spa baths, pools, and water features.

Part number:  GL018 T
For mounting in panels and spa baths

# IP Rating: IP68 @ 2m
# LED Output: 0.5watts per unit
# LED Input: 24vDC
# Material: Marine grade(316)stainless steel
# Glass: 5mm toughened, semi opaque walkover glass
# Cable: 3m HO5RN-F rubber cable attached
# Wiring: Parallel
# Cut-out: 27 x 30mm
# Weight: 0.32kg

Part number:  GL090 Flood/Spot
9watt LED ground light

# Input: 700mA driver(see below LED Drivers)
# IP Rating: IP68 @ 2m
# LED Output: 9watt Max.
# LED Beam angle: 45° Flood ; 12° Spot
# Material : Stainless steel 316
# Cable: 3m 2core cable
# Glass Temp: 55&degC
# Wiring: Series
# Hole size: 65mm
# Product weight: 0.82kg
# Single carton dims: 12×10x9cms

The GL040 is the most powerful LED groundlight from Collingwood so far, three high power LED’s combine to create a strong light output. While minimising power consumption. A long maintenance free life is assured, and with it’s robust stainless steel construction, the GL040 will remain looking great for years to comw. A low profile design and simple wing springs ensure installation is quick and easy.

Part number: GL040 Flood & Spot
Low profile 3watt LED ground light

# IP Rating: IP68 @ 1bar (9m of water)
# Material: Stainless steel (316)
# Beam angle: Flood 50°, Spot 12°
# LED Input: 350mA
# LED Output; 3watts @ 350mA
# Cable: 1m H05RN-F rubber cable

IAWS recently relocated to their new state of the art multimillion euro distribution centre in Grange Castle in Dublin.

As part of the design brief the glass exterior structure was required to be subtly illuminated in hours of darkness to reflect the modern design, sleek lines and innovative build of the main office building.

In association with the Art Of Light, FibreLED manufactured a bespoke LED strip system complete with custom housing. An exact level of brightness was needed so that the building was illuminated to a level yet not overbearing, garish or obtrusive to those working within the building. The system was required to give a halo, a glow to elevation yet the actual luminaires creating the effect were required to be discreet and not immediately visible.

Access for maintenance was also and issue therefore the system to be installed had to be of the utmost durability. The LED system was resin sealed for weathering protection. The bespoke housing gave due tolerance for expansion due to heat build-up behind the glass facia.

The LED Strip system installed in low voltage (12v) and consumes just 5watts per metre. The running cost for the system is negligible, the system requires no maintenance. This simple design using a quality, durable LED system is very effective.

FibreLED recently completed the lighting installation within the SPA in the new five Star Royal Marine Hotel in Dun Laoghaire in Dublin.  Our brief was to create a five star atmosphere, a relaxed mood and relaxed and enjoyable surrounding using a range of Fibre Optic and LED lighting effects.

Fibre Optic feature pieces within the treatment rooms create with a hypnotic twinkle effect. The awareness to the notion of light therapy and sensory stimulation as part of an overall treatment within a spa was a main consideration here.

Cove lighting halo effect within treatment rooms, over pool and throughout corridors dressing rooms creates and adds to a very a sleek feel throughout the SPA.

Fibre Optic Mood wall within relaxation room again reemphasizes the sensory experience and adds greatly to the treatment.

Bespoke LED acrylic bedside stands and planter boxes create a unique and aqua mood to the relaxation room.

Within the wet area such as the sauna, the steam rooms Fibre Optic colour changing effects add to what is a truly unique and most effective lighting installation.

Problem: Intense heat from 75watt AR111 Lamps caused the retail space to be uncomfortable and the air conditioning to be running over time. This created a huge consumption costs within the store.

Solution: FibreLED Power LED AR111 offered a heat free alternative, fraction of the running cost, and no maintenance. The air conditioning was also turned down adding to further savings. FibreLED LED lamps offer the correct light level and colour temperature to act as a suitable replacement for a retail scenario.

FibreLED were involved the design, manufacture and installation of a bespoke luminaire to be recessed into the stainless steel handrail. The LED strip system is resin sealed for maximum moisture protection, installed into a pvc channel with a polycarbonate face cove for vandalism protection. System is also low voltage and consumes less that 5watts per metre so consumption costs are negligible. The system also requires little or no maintenance.

The entrance to the Garden or Remembrance was recently modernised. Part of the design brief involved illumination of the area and the stairway via the glass balustrade with lighting to be incorporated into the stainless steel handrail.

Vandalism, light level, maintenance and running cost are all issues facing the design brief. FibreLED were involved the design, manufacture and installation of a bespoke luminaire to be recessed into and the stainless steel handrail. The LED strip system is resin sealed for maximum moisture protection, installed into a pvc channel with a polycarbonate face cove for vandalism protection. System is also low voltage and consumes less that 5watts per metre so consumption costs are negligible. The system also requires little or no maintenance

Ceiling coffers throughout the hotel were to be installed with fluorescent lamps. The potential of high running cost, maintenance, and shadow gaps between the batons caused the design to be reviewed.

FibreLED provided our colour changing FLpod LED strip system. Consuming just 5watts per metre against over 40watts per metre for the fluorescent, over 300m the energy saving was incredible. Additionally, the LED strip requires no changing of lamps, has a consistent gap free linear illumination with the option of colour changing.

A system that would provide the light levels, was easily installed and that would not required regular maintenance was required. Texaco replaced the lighting with the revolutionary FLpod LED signage system, which significantly reduces running costs and reduces the need for maintenance.

Problems also encountered previously with fluorescent canopy lighting was sporadic spots where the light fades or in some cases completely goes out. The FLpod LED system is consistent linear light with no gaps and guaranteed not to fade or fail. Texaco are now enjoying massive savings.

The most frustrating problem was the colour of the replacement tubes was always slightly different to the tubes that had been in place. Coupled with these issues was the consumption costs, the system had been running at around 50watts per metre.

The solution required an LED strip system that would be easily retrofitted, be extremely energy efficient, and would be durable in that the area post installation would be very difficult to access. More importantly however was that the LED system had to offer similar light levels and colour temperature to the Fluorescent. As you will notice the light had to travel up around 1.5m along the curved ceiling. As part of the sampling process 2m of the FLpod LED LUX warm white system was installed. Some of the fluorescent batons in the various colours were also switched on to offer a comparison. In direct comparison the client was shown the LED in situ. It was clear it offered a clean consistent light, excellent light level and perfect colour temperature

The Academy Hotel in Dublin had up to 300m of Xenon lighting within decorative coffers throughout the hotel’s reception bar and dining area. The system was consuming up to 85watts per metre and required regular maintenance.

The Xenon was running almost 24hours per day and was proving very costly. The system was also proving extremely costly to maintain and had entire sections that were completely out. The hotel was conscious or running costs and needed a solution that coupled with low consumption would offer the warm white colour, would offer a strong level of light and would require no maintenance. FibreLED’s system met all the requirements and was quickly and easily retrofitted. The FLpod LED LUX warm white is a flexible high output LED strip system it consumes around 5watt per metre and compared to the 85watts. Based on these huge savings the system will have paid for itself within a year.

The Tempo retail space in Dundrum Town Centre had over 60no. 50-watt halogen downlights running around 10 hour per day 6 days a week. The lights were within the main shop ceiling area and within the display cabinets. The cost to run these was estimated at around €2,000 per year.

This doesn’t include the maintenance cost involved with replacing lamps. Other issues such as the heat within the space resulted in the need to find a suitable lighting alternative. FibreLED specified, supplied and installed our FLCREE5 LED Downlighter replacement lamp. This lamp offers similar light level, it was decided to use the cold white colour to enhance the display. Each individual lamp was reduced from 50 to 5watts. The FLCREE5 has correct thermal management, beam angle and consumes just 5watts. The estimated cost to run the replacement LED system for the same period is around €200. Owners are enjoying incredible savings.

This installation is on the uppermost façade of the exterior of an extremely high building where access for maintenance is a major issue.

The installation required a durable, long-lasting, and extremely bright LED product. FibreLED’s, FLpod LED signage system was installed to the signage and mounted to the façade. Quinn’s illuminated logo is very eye-catching, bright and the worry of failure or fading is completely eradicated.

The Flash Player and a browser with Javascript support are needed..

A constant source of frustration and annoyance for us lighting people is the failure of those charged with design of landscaped areas and indeed their clients to adequately grasp the importance of the lighting scheme within the space. Expensive trees and plants, marble paving, cast iron or stainless steel water features cast into darkness for most of their existence by a failure to embrace the lighting brief.

Darkness falls in this country of ours in or around 5-6pm for about eight months of the year.
A large glass window at the rear of a home or within a corporate building becomes a large black square for most of the year. Indeed for the most part we are more often looking out upon a garden or landscaped area more so that being out in.

Could you imagine the garden light being the first lights you turned on when you arrived home? Could you imagine as you sit to dinner dimming down the internal lights and allowing the garden to flood into your living space? Could you imagine the black space at the back of you home becoming almost like a piece of art hanging on the wall?

Through careful design and thoughtful positioning FibreLED can turn this black space into a whole new room. Pockets of soft colour enhance planting and scrubs, illuminated trees silhouette onto the lawn or onto the walls behind creating a wealth of activity when the wind blows.

Not only from a practical point of view but from an aesthetic view point, any landscape scheme should first give just consideration to how that space is illuminated. How it will appear for most of the time it is being viewed. A thoughtfully illuminated garden area can be brought to life. Optional colour change can be easily added to suit the changing seasons or as various planting comes into bloom.

• From a full range of walkover/drive over paver luminaries.
• Submergible LED luminaries.
• spaced paver lights with a range of sizes,
• Tree uplighters.
• Water feature lighting
• Exterior low profile strip lighting single colour or colour change

Landscape lighting & Exterior

Due to its low consumption, durability, low maintenance and versatility LED lighting has become the main form of lighting to be specified within and exterior landscape schemes. The applications give endless diverse possibilities to the illumination of a landscape, public area garden or any outside space.

FibreLED have vast experience in creating the desired effect within this space considering issues such as vandalism, IP Rating, access, brightness. FibreLED can work with landscape design teams or can act a design arm for any project ensuring your desired effect is achieved with a quality, durable and reliable LED lighting system

• Walkover/ Drive over ground lights
• Recessed strip lights
• Custom feature lighting
• Flood lighting
• Uplighing of planting
• Water feature lighting
• Handrail balustrade lighting

Exterior Building

How is this building perceived in the hours of darkness? To answer this, what do you think when you see the building covered in Red Neon!! Or a new ceiling to floor glass building subtliy glowing in blue halo or in the companies corporate colours. The point is we perceive, we think, we have an opinion. It matters. How a building looks in the hours of darkness matters. FibreLED believe this and are passionate about getting the brief right.

In recent years the brightness level of high output LED modules has been increased greatly. LED luminaires can now rival traditional forms of lighting. Colour control and maintenance advantages make LED and ideal form of lighting for many Architectural projects. The exterior lighting of buildings has become as increasingly important part for the overall lighting package

The Flash Player and a browser with Javascript support are needed..

Feature/One Off Bespoke

“As diverse as design itself” is how we describe the many applications where Fibre Optic and LED lighting can be used to fantastic effect. FibreLED offer a service whereby we can sit down and trash out a design for a one off custom-made light feature. We offer a service whereby we can take your design idea and bring it to life. The teasing out of a design is a process we enjoy and developing a solution, developing an idea is an area of our business that makes us unique.

Within our manufacturing process we incorporate various coloured frosted glass/acrylics, we work with stainless steel and aluminium and marry this with the flexibility of Fibre Optic and LED lighting for bespoke light features and one off fitting.

Landscaped areas, water features, corporate receptions/ lobbies, backdrops, stairwells, feature walls, glass staircases requiring that extra something can be transformed. Additionally, many applications require something more than a standard fitting from the pages of a catalogue. Bespoke luminaries, one off fittings and adjustments to the standard and modifications are all part of this service.

We have manufactured and installed bespoke features to many area’s Spa’s, Hotels & Restaurants, corporate landscaped areas, domestic gardens, receptions desk, corporate lobby’s, retail outlets, bespoke light water features. Feature’s which became focal points of their environment had started life with the discussion “we need something special here”.
LED Furniture – The Shammie Range & Bespoke Features

As our business evolved into the area of bespoke light features and the embers of design were stoked and the depth of possibility be came apparent so the Shammie range was born. The Shammie range is a range of illuminated furniture pieces that are unique in design, incorporating high quality LED lighting coupled with beautifully assembled coloured acrylic. Some of the range is detailed below.

All of the range is available in a range of varied coloured acrylics and can be illuminated in White, Blue, Green, Red, Amber and colour change.

Illuminated frosted acrylic tile unit. Can be recessed into wall space, floor or ceiling. Available in 300mm x 300mm or the larger 600mm x 600mm.

The Flash Player and a browser with Javascript support are needed..

- Recessed lighting within decking
- Strip lighting to underside of deck creating floating effect
- Wall washing with colour
- Up lighting of trees shrubs
- Silhouetting and shadowing
- Bollard lights
- Waterfeature illuminations
- Uplighitng of walls and rear of the house

The Flash Player and a browser with Javascript support are needed..

– Lighting beneath a bench or at skirting level throwing light across the floor.
– Back lighting of mirrors
– Illumination of bath panel
– Back lighting of glass walls/ glass panelling
– Recessed floor lighting
– Sensor activated lighting around toilet
– Spot lighting of shelving/ cabinets

The Flash Player and a browser with Javascript support are needed..

- Strip lighting at ceiling level between panelling and ceiling.
- Ceiling cove lighting
- Spot lightings along corridor
- Low level lighting, wall lights installed above skirting

The Flash Player and a browser with Javascript support are needed..

- Starfield twinkle ceiling effect within children’s rooms.
- Strip lighting around panelling at ceiling level and or floor level.
- Around base of bed or backlighting effect around headboard creating floating effect.
- Under shelving
- Floor mounted corner up lighters
- Tiny LED floor lights activated by a movement sensor to highlight to route to the bathroom.
- Cove lighting at ceiling level
- Subtle LED reading luminaries

The Flash Player and a browser with Javascript support are needed..

- Under shelving, under/over press units highlight counter below or ceiling above.
- Under counter worktops or highlighting kick plates, on breakfast bar or kitchen islands.
- Within recessed alcoves to highlight items.
- Contrasting light and shadow effects.
- Recessed floor lighting.
- Spotlighting of shelving or cabinets
- Colour change to create dramatic effect

This exclusive, robust yet attractive, mid-sized (60mm diameter) LED light is ideal for path, lobby and deck lighting, inexpensive to run and with up to 100,000 hours of LED life, ensures a maintenance free product and makes the GL016 great value for money. With cool glass for added safety.

Part number: GL016 & GL016 AB Low profile groundlight

- IP Rating : IP68 @ 1bar (9m)
- Material : GL016 = Marine grade(316)stainless steel, GL016 AB = Antique Brass
- Glass : 5mm toughened walkover glass
- LED output : 1watt @ 350mA
- Cable : 3m H05RN-F rubber cable
- Beam angle : 45°
- 50-55mm x 40mm
- Sealed for life units

The Flash Player and a browser with Javascript support are needed..

FibreLED have built a wealth of experience in providing lighting solutions to many Spa/Pool and leisure amenities. The task of achieving the correct mood, ambience and atmosphere is rivalled by the equally important task of specifying and installing luminaires that will operate in what is quite a harsh environment.

Constantly on, high/low temperature, fluctuating temperature, excessive moisture and maintenance are all major issues when considering an efficient lighting system for areas such as Pool’s, Jacuzzi’s Sauna’s and Steam rooms, spa amenities etc.

FibreLED are confident we can eliminate these concerns while creating the right ambience with optional colour change. Our systems are submergible, linear luminaries to illuminate cascading water and an array of colour changing effects within saunas and stream rooms. The creation of the right mood within treatment rooms is also crucial. These areas require a lighting system with versatility, to be easily changed to suit the treatment.

Mood-walls, Starfield Ceilings and the whole notion of light therapy can greatly enhance the experience of the client who visits a Spa whose main goal is to relax. The feeling that one is in a Spa, a special place away from the outside world is created by atmosphere and the right atmosphere is created by careful lighting design.

FibreLED’s experience, attention to detail and product range can offer the complete turnkey service when it comes to the creation of a relaxing and slick atmosphere within wet areas, steam rooms, Saunas treatment rooms and the common areas within the location.

Applications

- Starfield ceiling
- Single colour and Colour changing strip lighting
- Submergible luminaires
- Mood Walls
- Colour changing back lit glass panels
- Specialist custom made furniture such as ice fonts, pedestals, planter boxes, shelving units

The Flash Player and a browser with Javascript support are needed..

LED is fast replacing Neon as the main light source for signage lighting. It really isn’t hard to understand why. In comparison LED offers richer colours, no maintenance and gives the added option of colour change. Below are some of the advantages for using LED for signage lighting.

- Easy to install and installed into letters is approximately a fifth of the time
- No delicate fabrication – Flexible and versatile
- Very durable for both transport and installation
- Waterproof for exterior signage
- No maintenance – long life, up to 80,000hrs
- A fraction of the running cost of Neon
- 12volt means the system is totally safe
- The low profile strip means one can add illumination to the smallest of letters logo’s and letter strokes.

Texaco

Consistent colour, durable and quality LED Installed into applications where returning for maintenance is not an option. View this project…

Quinn Direct

The importance of using a high quality, efficient and durable LED system means that maintenance not required. Particularly if access for maintenance in not very easily achieved. View this project…

The Flash Player and a browser with Javascript support are needed..

In recent times the demands of the design requirement within Pub/Club Lighting has greatly increased. Running cost, maintenance, control, versatility, safety, colour change are all major issues for the design brief. The ability to completely change the mood of the environment through subtle and well designed lighting effects can be invaluable. Scenes and settings to suit time of the year, day of the week, private functions or simply to add freshness are easily achieved. Lighting effects that are decorative yet durable, lighting effects that can be easily altered to suit the time of day. In recent times the importance of outside space has increased with the success of venues sometimes hinging of the standard and size of the beer garden/smoking area. FibreLED can design specify and install a lighting plan sensitive to safety concerns, durable to withstand their environment and versatile and subtle to create the desired effect and atmosphere.

Within any commercial venture none is more dependant on and a atmospheric lighting scheme the club / restaurant sector.

FibreLED can offer a turnkey solution from simple supply of durable and efficient energy saving LED systems to bespoke colour changing installations incorporating frosted glass, colour changing shelving units, mood walls etc.

FibreLED have an experienced team who can liaise with your main contractor, work with designers, architects and project managers to tease out a suitable lighting design for your pub club or restaurant.

Single colour or colour change, LED is the clear and obvious choice. Low running cost, colour changeable, low maintenance and safety make LED the far superior choice.

A public space within the UCD campus that comes alive at night. Feature benches with illumination internally, illumination of planters and planting, various bespoke features combine to create what is a real feature area within the campus.

The LED systems were specified to suit the demands of weather, vandalism, safety in terms of heat and electrical coupled with the environmental issues in terms of consumption and maintenance. FibreLED’s role was turn-key from assisting with design to specification and manufacture of custom pieces and full installation.

The plaza and entrance to the new children museum at the Beacon is as you will see from the images very carefully illuminated using indirect soft lighting effects.

Notice the floating planters illuminated from the base with a hidden strip creating a halo across the path way. Notice the steps where the entire stair case in illuminated without a light fitting being obviously visible. FibreLED designed, manufactured and installed a bespoke lighting strip which was installed directly into the handrail. Design concerns such as weathering, vandalism, light level and maintenance were all part of the brief that had to be considered and overcome. It is obvious that a quality, durable and long lasting LED system must be used in such an application. The effect looks fantastic.

Ballina Ridge Pool Bridge

IADT -  Dun Laoghaire

Gorey Civic Square

Omniplex Cinema

6×3W and 12×3W available in cyan, white, amber, royal blue, green, red & RGB. RGB version has DMX compatability. Supplied with RJ45 end. Silver coloured body helps to control the thermal management (heat). Beam angle: For wall wash and general floodlight purpose use Flood lens 10° ± 62°.

Beam angle: For precise and directional applications use Spot lens 10° ± 35°

• Model shown is 6×1W, rated 6W or 6×3W rated 18W. Luxeon LEDs.
• Integral power supply allows 110-240V AC, 47-64Hz
• Dimensions: Height 110mm x Width 70mm x Length 151mm. Wt: 1180g
• Model