DMXI

Part number: DMXI
DMX interface
Max.load: 10 RGBox30 connected in parallel
Product weight: 0.1kg
Input: Connection from RGBox30 for power, DMX controller for DATA
Material: Plastic housing

Only use shielded twisted pair cables for the DMX signal wiring.
Earth the shielding of the cable.
Complete the DMX signal circuit by placing a 120 ohm resistor
in the free terminals of the final DMXI in the circuit.
Connect a maximum of 32 DMXI units to one DMXC.
Maximum cable run of between 20 and 50m depending on levels
of RFI and the quality of cabling.
Use an RS485 repeater where longer cables are needed.